Technique · Intermediate
Attenuation Pad
A switchable circuit that lowers a mic's output to prevent overload on loud sources.
An attenuation pad is a switch, often marked -10 or -20 dB, that drops a microphone's output level before it reaches the preamp. You engage it on loud sources, a drum, a shouting subject, a guitar amp, so the signal doesn't overload the mic's electronics or slam the preamp into distortion. It trades a little of your quietest detail for headroom against clipping when the source is genuinely loud.
Also called pad, mic pad, -10dB pad, attenuator
Related
- Gain StagingManaging signal level at every stage of the chain so audio stays far above the noise floor and safely below clipping — the discipline behind clean recordings.
- Mic PreampThe circuit that boosts a mic's tiny signal up to a usable line level with as little added noise as possible.
- Audio HeadroomThe safety margin between your normal signal level and the point of clipping.
- Clipping (Audio)Distortion that occurs when a signal exceeds the maximum level and the waveform peaks get flattened.
- The Signal ChainThe mental model of how sound travels from source to file: mic → preamp → converter → DAW — and how every link sets the ceiling for the next.