Technique · Beginner
Audio Is Clipping
The signal exceeds 0 dBFS, flattening the waveform peaks into harsh, unrecoverable distortion.
Clipping happens when a recorded signal is louder than the system's maximum, so the peaks get squared off and turn to crackly distortion. The cause is almost always input gain set too high for the source. The fix is to lower gain before recording and aim your loudest peaks around -12 to -6 dBFS, leaving headroom. Once something is truly clipped the information is gone, so declippers only estimate what was lost.
Also called distorted audio, clipped sound, audio distortion, peaking audio
Related
- Clipping (Audio)Distortion that occurs when a signal exceeds the maximum level and the waveform peaks get flattened.
- Gain StagingManaging signal level at every stage of the chain so audio stays far above the noise floor and safely below clipping — the discipline behind clean recordings.
- Audio HeadroomThe safety margin between your normal signal level and the point of clipping.
- LimiterA tool that hard-stops audio from exceeding a set ceiling, used to prevent clipping and maximize loudness.
- DecibelA logarithmic unit measuring sound level or signal strength, where 0 dBFS is the digital ceiling.
- Noise FloorThe constant low-level background noise present in a recording beneath the actual signal.