Gear · Beginner
Fader
The sliding control on a mixer channel that sets how loud that channel is in the mix.
A fader is the linear slider at the bottom of a mixer or DAW channel strip that sets the level going to the mix. It's marked in decibels, with 0 dB meaning unity, where the signal passes through unchanged, and it's finer near unity than near the bottom. Faders balance a mix after gain is set, and many engineers ride them by hand or write automation for each section.
Also called channel fader, volume fader, slider
Related
- Gain StagingManaging signal level at every stage of the chain so audio stays far above the noise floor and safely below clipping — the discipline behind clean recordings.
- Gain vs VolumeGain sets how much a mic signal is boosted at the input; volume sets the output level you hear.
- VCA FaderA control fader that scales the levels of assigned tracks without summing their audio.
- AutomationRecording parameter changes over time so knobs and faders move automatically during playback.
- Control SurfaceA physical panel of knobs, faders, and buttons that drives editing, grading, or mixing software by touch.