Technique · Beginner
Inking Up
Applying ink to the block or plate before printing, in the thin, even amount the method needs.
Inking up is the step where ink goes onto the matrix. For relief you roll several thin coats over the surface with a brayer, and for intaglio you push ink into the grooves and wipe the surface clean with stiff cloth. Most patchy, blurry or filled-in prints come from this step, not from the carving.
Also called inking the block, inking the plate, rolling up
Related
- BrayerA hand roller used to spread printing ink into a thin, even layer and apply it to a block.
- Burnishing (Printmaking)Printing a relief block by hand pressure alone, rubbing the back of the paper instead of using a press.
- Relief PrintingPrinting from a raised surface: you cut away what should stay blank and ink what is left.
- IntaglioPrinting from lines cut below the surface of a plate: the ink sits in the grooves, not on top.
- Ghost PrintA second, paler print pulled from a plate or block without adding new ink.