Technique · Intermediate
Phantom Power Not Working
A condenser mic gives no signal because 48V phantom power isn't reaching it through the XLR chain.
Condenser mics need 48V phantom power delivered over a balanced XLR cable to charge their capsule, and if any link fails, no button pressed, an unbalanced cable, a TRS adapter, or an inline device that blocks DC, the mic stays silent. Confirm the 48V switch is on, use a proper three-pin XLR run, and remove any pad or splitter that severs the phantom path. Dynamic mics, by contrast, don't want phantom at all.
Also called no phantom power, 48v not working, condenser mic no signal, phantom power failure
Related
- Phantom Power48-volt DC power sent up an XLR cable to run condenser mics that need external power.
- Condenser MicrophoneA sensitive, detailed studio mic that needs phantom power and captures fine high-end nuance.
- XLRThe 3-pin balanced audio connector used by professional microphones and gear.
- Audio InterfaceThe box that converts mic and instrument signals to digital for your computer, and back for monitoring.
- Dynamic MicrophoneA rugged, less sensitive mic that rejects room noise, ideal for untreated spaces and loud sources.