Technique · Advanced
Tie-In
Tapping a building's electrical service directly to pull heavy power for the lighting package.
A tie-in is when the electric department connects straight into a location's main power — a lug panel, disconnect, or bull switch — to draw far more current than the wall outlets allow. It routes that feed into a distro and out to the set. It's high-risk, high-consequence work reserved for a licensed or highly experienced electrician, and many jurisdictions require permits and lockout procedures.
Also called tying in, house tie-in, bull switch tie-in
Related
- Cam-Lock ConnectorThe high-amperage single-pole connectors that carry big feeds from a generator or tie-in to the distro.
- Distro (Distribution)The gear that takes one big power feed and splits it into safe, breaker-protected outlets for the lights.
- Bates ConnectorThe heavy-duty three-round-pin stage plug electrics use for higher-amperage lighting power on set.
- LunchboxA small, portable distribution box that breaks a Bates feed out into several Edison and Bates outlets.
- BallastThe power supply that starts and regulates a discharge or fluorescent lamp — the box between the wall and the head.
- DimmerA device that reduces the power to a fixture to lower its intensity — from a small hand squeezer to a full board.